Business · Commercial solar maintenance
Operations and maintenance for commercial solar.
Planned and reactive maintenance that keeps commercial assets generating and compliant.

- Emergency call-out
- 24/7
- Imaging surveys
- Thermal
- And string testing
- IV-curve
- And reactive maintenance
- Planned
What’s included
Planned visits, proper testing and a call-out when it matters.
We service commercial and industrial sites with planned maintenance, diagnostics and reactive call-outs — to keep every kWh earning.
-
Scheduled inspections & cleaning
Regular site inspections and panel cleaning, so soiling and developing faults are caught on a schedule rather than noticed in the figures.
-
Thermal imaging & IV-curve testing
Thermal imaging surveys pick out hotspots; string and IV-curve testing checks how each string is performing electrically, so faults can be traced to where they start.
-
Inverter servicing & spares
Inverters serviced as part of the plan, with spares when a part needs replacing, so the heart of the system keeps running.
-
24/7 emergency call-out
Reactive call-outs around the clock when something goes wrong on site, alongside the planned programme.
-
Rapid-shutdown integration
Rapid-shutdown systems kept integrated and working, so the DC voltage on the roof can still be dropped to a safe level at the push of a button.
-
Monitoring & reporting
Performance monitored between visits, with reporting you can act on — what was found, what was done and what comes next.
Scheduled inspections & cleaning
Keep commercial assets generating.
Dust, pollen, lichen and bird mess can knock 5–20% off output, and a large commercial rooftop array collects all of them. Scheduled inspections and cleaning keep the panels, fixings, cabling and containment under regular review, so problems are found on a visit rather than through a dip in generation.
Inverter health checks, thermal imaging, string tests and firmware updates catch faults before they cost generation. More kit means more firmware, more settings and more tariff optimisation opportunities; a maintenance plan keeps every component talking, updated and tuned to your current tariff.
-
Inspect
Regular site inspections of the array and its cable routes.
-
Clean
Panel cleaning to clear the soiling that drags output down.
-
Check
Inverter health checks and firmware updates.
Thermal imaging & IV-curve testing
Find faults before they show in the figures.
Some faults can’t be seen from the ground and are easy to miss in the monitoring. Thermal imaging surveys show panels and connections running hotter than they should — the hotspots that point to a developing fault. Thermal surveys work best in strong sunlight, when faults under load show most clearly.
String and IV-curve testing looks at the electrical side: how each string performs against how it should, which narrows a drop in generation down to where it’s coming from. Together they turn vague underperformance into a specific repair, and results recorded at each visit give a baseline to compare against next time.
-
Thermal imaging surveys
Hotspots in panels and connections.
-
String testing
Each string checked against its expected performance.
-
IV-curve testing
The current–voltage curve of a string, traced to pinpoint faults.
Rapid-shutdown integration
Safety systems that keep working.
Rapid shutdown drops the DC voltage on the roof to a safe level at the push of a button — essential for firefighter safety and increasingly expected on commercial installs. It only helps if it works when it’s needed, which is why rapid-shutdown integration sits in our C&I O&M alongside inverter servicing. Firmware, communications and shutdown devices all have to stay in working order for that.
We install these systems too: on the 320 kW Tan Sales roof in London, our in-house team installed and commissioned a full SolarEdge rapid-shutdown system.

How it works
From half-hourly data to commissioning.
One contractor, fully accountable from feasibility to commissioning.
- 01 Your data
Feasibility
Send us your roof plan or half-hourly data — we model generation against your actual load profile.
- 02 Design
Design & G99
Structural and wind-load assessment, string design and the G99 / DNO application, handled end to end.
- 03 On programme
Installation
Scaffold and access by 100% Access Ltd, then our in-house teams install — phased around your operation where needed.
- 04 Handover
Commissioning & O&M
Testing and certification at handover, then planned and reactive maintenance with 24/7 emergency call-out.
24/7 emergency call-out
Planned maintenance, with a call-out behind it.
Planned visits catch problems early, but not every fault waits for the schedule. Our C&I O&M includes 24/7 emergency call-outs, so a site that loses generation, or has a fault that needs making safe, isn’t left until the next visit.
Between visits, monitoring and reporting keep watch on performance, with reporting you can act on, so maintenance keeps a commercial asset generating and compliant rather than simply checked. Reports also build up a record of what was inspected, tested, found and fixed.
-
24/7 call-out
Emergency response when a fault can’t wait.
-
Monitoring
Performance watched between visits.
-
Reporting
What was found and done, in a form you can act on.
FAQs
Commercial solar maintenance: your questions.
Straight answers from the team who quotes and installs.
All FAQsSend a roof photo, site plan or half-hourly data on WhatsApp
Message on WhatsAppRegular site inspections, panel cleaning, thermal imaging surveys, string and IV-curve testing, inverter servicing, rapid-shutdown integration, vegetation management, monitoring, reporting and 24/7 emergency call-outs — planned and reactive maintenance that keeps commercial assets generating and compliant.
Yes. 24/7 emergency call-out is part of our C&I O&M, backing up the planned programme of inspections, cleaning, testing and inverter servicing, so a fault on site isn’t left until the next scheduled visit.
Dust, pollen, lichen and bird mess can knock 5–20% off output. That’s why scheduled inspections and cleaning are part of our commercial O&M, alongside the testing that finds faults soiling can hide. How often a site needs cleaning depends on its location and surroundings, which is why inspections come first.
Thermal imaging shows panels and connections running hotter than they should — hotspots that point to developing faults. String and IV-curve testing checks each string’s electrical performance, narrowing a drop in generation down to where it’s coming from. Both are part of our C&I O&M, alongside scheduled inspections and cleaning.
Rapid shutdown drops the DC voltage on the roof to a safe level at the push of a button, which only helps if the system works when it’s needed. Rapid-shutdown integration is part of our C&I O&M, and we installed and commissioned a full SolarEdge system at Tan Sales in London.
Ready when you are
Ready to go 100% renewable?
Send us your roof plan or half-hourly data. We’ll model generation against your actual load profile and come back with capacity, cost, payback and the funding routes available.
- Office hours
- Mon–Fri, 8am–6pm
- Head office
- Unit 2, Ebdon Bow, Ebdon Road, Weston-super-Mare, BS22 9NZ
- +44 7301 468735
Where we work, nationwide from Weston-super-Mare
- 1Your site
- 2About the project
- 3Your details
