Products · Home battery and EV charger

Sigenergy installation: a battery with whole-home backup, and the charger to match.

Our London install pairs a Sigenergy battery storage system, configured for whole-home backup, with a Sigenergy EV charger — commissioned with the homeowner’s solar for self-consumption charging.

Sigenergy
Sigenergy EV charger, socket version, with its charging cable coiled on a holster on a brick wall at a London home
The Sigenergy EV charger at our London install, where the home also has a Sigenergy battery configured for whole-home backup.
Backup configured on our London install
Whole-home
Usable energy of a SigenStor BAT 10.0 module (9.04 kWh total)
8.76 kWh
Battery modules per Sigen Energy Controller
1–6
Sigen EV AC Charger warranty (Europe)
3 years

On our own jobs

Where we’ve fitted Sigenergy.

All projects
Case studies 10 projects, from single homes to public-sector rooftops. See every project

What the kit does

Stored solar for the house, and a charger for the car.

SigenStor is Sigenergy’s modular home battery. Its battery modules sit on a Sigen Energy Controller — one to six per controller — and Sigenergy rates the single-phase controllers from 3.0 to 12.0 kW.

The Sigen EV AC Charger is the wall box. Sigenergy makes it in 7, 11 and 22 kW versions, with dynamic load management and a 4G, WLAN or Ethernet connection. The unit at our London install is the socket version, with a separate cable stored on a holster.

The range

Sigenergy kit, in the manufacturer’s own figures.

Published specifications only — your design names the exact model, size and warranty terms for your property.

Sigenergy SigenStor battery stack, white with a teal edge
SigenStor battery stack (manufacturer image).

SigenStor battery modules

Sigenergy’s modular home battery, stacked on a Sigen Energy Controller. Our London home has a Sigenergy battery configured for whole-home backup.

Total energy, BAT 6.0 / BAT 10.0
6.02 / 9.04 kWhwwwstatic.sigenergy.com
Usable energy, BAT 6.0 / BAT 10.0
5.84 / 8.76 kWhwwwstatic.sigenergy.com
Depth of discharge
100%wwwstatic.sigenergy.com
Max charge/discharge, BAT 6.0 / BAT 10.0
3000 / 4600 Wwwwstatic.sigenergy.com
Modules per controller
1–6wwwstatic.sigenergy.com
Ingress protection
IP66wwwstatic.sigenergy.com
Earlier modules, BAT 5.0 / BAT 8.0
Total 5.38 / 8.06 kWh · usable 5.2 / 7.8 kWhwwwstatic.sigenergy.com
Battery warranty (European terms)
10 years — cut to 5 years if offline for more than a year in totalwwwstatic.sigenergy.com
Sigenergy Home Energy Gateway, white wall-mounted unit
Sigenergy Home Energy Gateway (manufacturer image).

Sigen Energy Controller and Home Energy Gateway

The Energy Controller runs the battery modules; the Home Energy Gateway is Sigenergy’s whole-home backup device.

Energy Controller, single-phase
3.0–12.0 kWwwwstatic.sigenergy.com
Controller max efficiency
98.0% (3.0–6.0 SP) · 97.6% (8.0–12.0 SP)wwwstatic.sigenergy.com
Off-grid peak
2× nominal power for 10 swwwstatic.sigenergy.com
Controller ingress protection
IP66wwwstatic.sigenergy.com
Backup switchover
“0 ms” — only with Gateway, Controller and battery together, and the controller’s nominal power above the home’s total loadswwwstatic.sigenergy.com
HomePro SP-F gateway
“Fully supports 100 amp single-phase backup power for the entire home”sigenergy.com
Energy Controller warranty (European terms)
10 yearswwwstatic.sigenergy.com
Sigen EV AC Charger with a tethered cable, white glass front and green light bar
Sigen EV AC Charger, tethered version (manufacturer image) — ours in London is the socket version.

Sigen EV AC Charger

Sigenergy’s wall-mounted AC charger. Ours in London is the socket version, with a separate cable on a holster.

Power
7, 11 or 22 kWsigenergy.com
Output voltage
220–240 V or 380–415 Vsigenergy.com
Connection
Type 2 connector, or Type 2 socket with shuttersigenergy.com
Connectivity
4G · WLAN · Ethernetsigenergy.com
Load management
Dynamic load managementsigenergy.com
Durability
IP65 · IK10 reinforced glass · operates at −30 °C · no power derating at 55 °Csigenergy.com
UK protection
Integrated PEN breaker; Sigenergy states compliance with Section 722 of BS 7671:2018+A2:2022sigenergy.com
Warranty (Europe)
3 years, for chargers installed on or after 1 Nov 2023wwwstatic.sigenergy.com

Where it fits

Whole-home backup, with the conditions that make it work.

Most modern hybrid systems offer Emergency Power Supply (EPS), where essential circuits stay live from the battery when the grid drops. Whole-home backup goes further — and our London battery is configured for it.

Sigenergy publishes a “0 ms” backup switchover, but only with the Sigen Energy Gateway, Energy Controller and battery working together, and with the controller’s nominal power higher than the home’s total loads. What can run on backup depends on those loads, and your design sets it out.

  1. Solar-aware charging

    At our London install the EV charger is integrated with the home’s solar generation, for self-consumption charging.

  2. Dynamic load management

    Sigenergy lists dynamic load management on the EV AC Charger.

  3. A gateway for the whole home

    Sigenergy says its HomePro SP-F gateway fully supports 100 amp single-phase backup power for the entire home.

Worth knowing

The conditions, in plain English.

What the manufacturer’s own documents say — so there are no surprises after handover.

  • A SigenStor BAT 10.0 module is 9.04 kWh total and 8.76 kWh usable — not a round 10 kWh.
  • The “0 ms” backup switchover needs the Sigen Energy Gateway, Energy Controller and battery together, and the controller’s nominal power must be higher than the home’s total loads.
  • Sigenergy’s 10-year battery warranty depends on the system staying online: offline for more than a year in total, and it drops to 5 years. These are Sigenergy’s European terms — it lists no UK-specific warranty document.
  • Sigenergy’s performance cover is 60% of usable energy for 10 years or a minimum throughput per module — and it lists no throughput figure for the BAT 10.0.
  • The charger’s 22 kW rating needs the 22 kW model on a three-phase supply; Sigenergy lists output at 220–240 V or 380–415 V.

Design, install, commission

Designed, installed and commissioned as one system.

The London job covered design, supply, installation and commissioning. We configured the Sigenergy battery for whole-home backup, integrated the EV charger with the home’s solar generation, and commissioned the self-consumption charging logic on-site.

We commission everything onto a single hybrid inverter ecosystem where possible, so you get one app showing generation, consumption, battery state, EV charging and grid flow in real time.

Services

Where Sigenergy fits.

What our customers say

Trusted by homeowners across the UK.

FAQs

Sigenergy: your questions.

Answered from the manufacturer’s published information and our own installs.

All FAQs

Send photos of your roof, fuse box or bill on WhatsApp

Message on WhatsApp

A Sigenergy battery storage system configured for whole-home backup, and a Sigenergy EV charger — designed, supplied, installed and commissioned by our team, with the charger integrated with the home’s solar for self-consumption charging.

Not quite. Sigenergy’s datasheet gives the BAT 10.0 a total energy of 9.04 kWh and usable energy of 8.76 kWh, at 100% depth of discharge. The BAT 6.0 is 6.02 kWh total and 5.84 kWh usable.

Sigenergy publishes a “0 ms” backup switchover, with conditions: it needs the Sigen Energy Gateway, Energy Controller and battery together, and the controller’s nominal power must be higher than the home’s total loads. What can run on backup is set out in your design.

Keep the system online. Sigenergy’s European warranty gives 10 years on SigenStor batteries, but if the system is offline for more than a year in total, the warranty drops to 5 years.

Only the 22 kW model, on a three-phase supply. Sigenergy makes the EV AC Charger in 7, 11 and 22 kW versions, with output listed at 220–240 V or 380–415 V. Its European warranty is 3 years for chargers installed on or after 1 November 2023.

Ready when you are

Ready to go 100% renewable?

Tell us about your property and we’ll design a system around your roof, your usage and your budget — with no obligation.

Office hours
Mon–Fri, 8am–6pm
Head office
Unit 2, Ebdon Bow, Ebdon Road, Weston-super-Mare, BS22 9NZ
  1. 1Your property
  2. 2About the project
  3. 3Your details

Free Solar Assessment

For free advice, call 07301 468735.

Enter your postcode.

Installation type

Choose one option.

About the project

A little more detail helps us design the right system first time.

Roof or site type
When are you looking to install?

Your details

Last step — then we’ll be in touch.

Enter your name.

Enter a phone number.

Enter a valid email address.

Thanks, we’ve received your details.

Our team replies within 24 hours to discuss your project and arrange your free design.